Product Specifications (Reference)
Composition: Epoxy resin + hardener + functional additives
Color: Transparent or light yellow
Density: Approximately 1.1–1.3 g/cm³
Solids content: ≥70%
Mixing ratio: Resin: Hardener = 2:1 (volume ratio) or as per recipe
Application method: Brush, roller, spray
Theoretical spreading rate: 0.1–0.2 kg/m² (depending on substrate absorptivity)
Dry film thickness (DFT): 30–50 μm
Touch-free time: 2–4 hours (25°C)
Through-free time: 8–12 hours (25°C)
Full cure: 7 days (25°C)
Adhesion: ≥2.0 MPa
Abrasion resistance: Good, provides a base for Midcoats or Topcoats
Chemical resistance: Moderate
VOC content: ≤50 g/L (Low-solvent/solvent-free available)
Key Features
Seals pores in concrete or mortar bases, reducing uneven absorption.
Improves adhesion and smoothness of subsequent primers or Topcoats.
Prevents bubbling, water seepage, and dust from affecting the application.
Can be used with flat paint, self-leveling, and polyurethane Topcoats.
Eco-friendly, low-VOC, with solvent-free options available.
Applications
Base sealing for industrial plants, warehouses, and workshops.
Concrete floors in food factories, electronics factories, and laboratories.
Base sealing for commercial buildings (shopping malls, office buildings, garages).
Preparation for various concrete or mortar base floors.



English
中文简体










ENG